Sale!

    2024 Elevate Your Drone: Best MatekSYS H743-WLITE FC

    $96.99

    The MATEKSYS H743-WLITE Flight Controller is equipped with STM32H743VIH6, ICM42688-P, DPS310, OSD, 7 UARTs, 1 CAN, 2x I2C, 12x PWM outputs, and 3x BEC and other cool features that make this FC a winner in the wing game!
    Add to Wishlist
    Add to Wishlist

    Description

    About this product

    The MATEKSYS H743-WLITE Flight Controller is equipped with STM32H743VIH6, ICM42688-P, DPS310, OSD, 7 UARTs, 1 CAN, 2x I2C, 12x PWM outputs, and 3x BEC and other cool features that make this FC a winner in the wing game!

    Features

    • Equipped with BEC 5V output, which is designed for flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
    • Equipped with BEC 9V/12V output, which is designed for Video Transmitter, Camera, Gimbal etc.
    • Equipped with MATEKH743 firmware
    H743-WLITE-Wiring 2024 Elevate Your Drone: Best MatekSYS H743-WLITE FC

    Specifications

    • MCU: STM32H743VIH6, 480MHz , 512KB RAM, 2MB Flash
    • IMU: ICM42688-P
    • Baro: DPS310 (I2C2)
    • OSD: AT7456E
    • Blackbox: MicroSD card slot (SDIO)
    • 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
    • 13x PWM outputs(12+LED)
    • 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
    • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
    • 2x I2C
    • 1x CAN
    • USB/Beep Extender with Type-C(USB2.0)
    • Dual Camera Inputs switch
    • 9V(12V) for VTX power switch
    • High-precision Current Sense, 220A range
    • ADC VB2 voltage divider: 1K:20K
    • ADC AirSpeed voltage divider: 20K:20K

    FC Firmware

    • INAV: MATEKH743
    • ArduPilot: MATEKH743

    PDB

    • Input voltage range: 6.8~30V (2~6S LiPo)
    • 1x ESC power pads
    • Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
    • Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
    • Sense resistor: 90A continuous, 220A peak

    BEC 5V output

    • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
    • Continuous current: 2 Amps, Max.3A

    BEC 9V /12V output

    • Designed for Video Transmitter, Camera, Gimbal ect.
    • Continuous current: 2 Amps, Max.3A
    • 12V option with Jumper pad
    • for stable 9V/12V output, input voltage should > output voltage +1V

    BEC Vx output

    • Designed for Servos
    • Voltage adjustable, 5V Default, 6V or 7.2V via jumper
    • Continuous current: 8 Amps, Max.10A
    • for stable Vx output, input voltage should > Vx voltage +1V

    BEC 3.3V output

    • Designed for Baro / Compass module and external 3.3V peripherals
    • Linear Regulator
    • Continuous current: 200mA

    Physical

    • Mounting: 25 x 25mm, Φ2mm
    • Dimensions: 44 x 29 x 14.5 mm
    • Weight: 22g w/ USB/buzzer adapter

    Includes

    • 1x H743-WLITE
    • 1x USB(Type-C)/Beep (Passive buzzer) Extender
    • 1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
    • 2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port
    • 1x Rubycon ZLH 35V 470uF capacitor
    • Dupont 2.54 pins (Board is shipped unsoldered)