Sale!

    2024 Precision Navigation: Best MATEKSYS GNSS M8Q-CAN GPS

    $43.00

    The Matek GNSS M8Q-CAN, UAVCAN & MSP GPS features AP F303 CAN node, SAM-M8Q, QMC5881L, DPS310, I2C, Uart1 & Uart3 breakout. UAVCAN protocol & UART_MSP.
    Add to Wishlist
    Add to Wishlist

    Description

    About this product

    The Matek GNSS M8Q-CAN, UAVCAN & MSP GPS features AP F303 CAN node, SAM-M8Q, QMC5881L, DPS310, I2C, Uart1 & Uart3 breakout. UAVCAN protocol & UART_MSP.

    Specifications

    • ArduPilot AP_Periph F303 CAN node
    • GPS SAM-M8Q (GPS, GLONASS, Galileo)
    • Magnetic Compass QMC5883L
    • Barometer DPS310
    • UART1, Firmware update
    • UART2, onboard GPS
    • UART3, MSP Protocol (To be supported)
    • CAN, UAVCAN Protocol
    • I2C, onboard QMC5883L & DPS310
    • I2C JST-GH connector, external AirSpeed sensor
    • CAN bootloader LED, Blue
      • Fast blinking, No communication between CAN node and Flight Controllers
      • Slow blinking, Communicating between CAN node and Flight Controllers
    • GPS PPS LED, Green
      • blinking(1Hz) when GPS has 3D fixed
    • Boot button
    • Input voltage range: 4~6V
    • Power consumption: 100mA
    • Operating Temperatures: -20~80 °C
    • 29mm*29mm*9.7mm
    • 11.3g

    Tips

    • u-blox M8Q series has no external flash memory
    • Compass Alignment(Arrow forward and flat mounting): Ardupilot/Mission Planner: Rotation None
    • Make sure to have compass/magnetometer 10cm away from power lines/ESC/motors/iron-based material
    • The scratches on the ceramic antenna are the result of tuning the antenna by ublox.
    • UART3 MSP Protocol is not implemented for now.

    Diagram

    M8Q-CAN_MSP 2024 Precision Navigation: Best MATEKSYS GNSS M8Q-CAN GPS

    Includes

    • 1 x M8Q-CAN
    • 2 x JST-GH-4P to JST-GH-4P 20cm silicon wire