A Complete List:How To Turn DJI Drone Off?


Knowing how to properly turn off a DJI drone is essential for safe operation and maintenance. First, to turn off a DJI drone, find the power button on the drone or controller, then hold it down until the drone is completely powered off.

image-840 A Complete List:How To Turn DJI Drone Off?

In this article, we will discuss the steps to turn off popular DJI drones such as the DJI Mini 2, DJI Mini 3, DJI Mini SE, DJI Air 2S, DJI Mavic Pro, and DJI Mavic Air 2. Understanding the correct shutdown process ensures the longevity of your drone’s battery life and helps prevent any accidental issues during storage or transportation.

Let’s delve into the instructions for turning off these DJI drones effectively.

Why should you fully power down the drone after landing?

There are a few key reasons to power down your DJI drone completely rather than just leaving it on after landing:

1.Conserves battery

Leaving it on drains the battery which shortens lifespan. Fully off saves power.

2.Avoids overheating

Electronics and motors can get hot sitting idle while on. Turning off cools components.

3.Resets systems

Cycling the drone all the way off and on resets any glitches or errors.

4.Safety

With propellers off, there is no risk of accidental spinning.

Unless you plan to immediately takeoff again, always fully power down your drone after landing. This extends battery life, prevents issues, and improves safety.

image-851 A Complete List:How To Turn DJI Drone Off?

What happens if you never fully power down the drone?

Constantly leaving your DJI drone powered on even when not flying can lead to some negative consequences:

  • Battery capacity decreases faster over time with repeated partial drain cycles.
  • Motors and electronics may overheat leading to potential damage or failure.
  • Increased wear and tear on components that are energized unnecessarily.
  • Higher risk of firmware glitches or system errors.
  • Accidental activation of controls leading to injuries.

To maximize your drone’s lifespan and prevent problems, make it a habit to completely shutdown after every flight session.

Is it okay to just unplug the battery to turn off?

While physically removing the Intelligent Flight Battery will power down the drone, it is not recommended as the proper method for powering off for a few reasons:

  • May corrupt firmware or interrupt an update if one is in progress.
  • No chance for drone to safely complete the automated power off sequence.
  • Suddenly cutting power could damage microSD card files.
  • Higher risk of damaging the battery release mechanism.

Instead use the standard onscreen power off procedure so the drone can safely shut itself down.

What is the correct shutdown procedure using the remote?

To properly turn off your DJI drone using the remote controller:

  1. Land the drone and leave the battery inserted.
  2. Hold down the power button on the remote controller for 3-4 seconds until prompted.
  3. In the DJI Go app, tap the “Power Off” confirmation when it pops up.
  4. The drone will automatically begin the power off sequence indicated by blinking LEDs.
  5. All systems will safely shutdown.
  6. Once complete, you can remove the battery to fully cut power.

This ensures a graceful power down without immediately cutting power to the delicate electronics.

How do I power off using just the drone itself?

If you don’t have the remote controller, you can also initiate the shutdown sequence directly using just the drone:

  • After landing, press and hold the power button on the drone for 3-5 seconds.
  • The drone status indicator LEDs will start blinking to indicate power off is in progress.
  • Wait for the blinking sequence to end indicating systems are completely turned off.
  • Remove the battery once the drone is fully powered down.

Just holding the power button briefly will turn on the drone, so make sure to long press for several seconds to initiate shutdown.

Should I leave the battery in when storing the drone?

When putting your DJI drone into storage between flying sessions, best practice is to remove the Intelligent Flight Battery completely rather than leave it inserted.

  • Leaving battery in risks overdischarge during storage which permanently reduces capacity.
  • Battery could leak or corrode over time while inserted if fully depleted.
  • Safer to store battery separate from drone.
  • Prevents accidental power on of drone during storage.

Remove the battery, then power off the drone fully before packing it up for storage to extend battery lifespan.

image-850 A Complete List:How To Turn DJI Drone Off?

What is the proper order of shutdown steps?

When finishing a drone flight, there is a specific sequence to properly shut everything down:

Step 1

Land drone safely from flight.

Step 2

Power off drone via app or remote control button.

Step 3

Wait for drone to complete automated off sequence.

Step 4

Turn off remote controller once drone is powered down.

Step 5

Disconnect your mobile device from drone WiFi.

Step 6

Remove Intelligent Flight Battery from the drone.

Step 7

Power off the battery for storage.

Step 8

Remove memory card.

Step 9

Pack up drone securely.

Following this exact order allows the drone and its components to shut down appropriately without damage.

Is it okay to force power off by holding the button?

If the drone is unresponsive or having errors, do NOT force power it off by holding down the power button for an extended time.

This is risky:

  • Could corrupt the firmware or interrupt an update.
  • Does not allow drone to safely conclude its automated off routine.
  • May cause physical damage to microSD card.
  • Cutting power suddenly could impact sensitive electronics.

Wait patiently and try restarting to resolve any issues without forcing an immediate power off. Only use the standard power down process.

Proper Shutdown Steps By DJI Drone Model

Drone ModelShutdown Procedure
Mavic 3Press power button on drone 3 secs OR remote power button > Confirm on app
Mavic 2 Pro/ZoomPress power button on drone 3 secs OR remote power button > Confirm on app
Mavic Air 2Press power button on drone 3 secs OR remote power button > Confirm on app
Mavic Mini 2Press power button on drone 3 secs OR remote power button > Confirm on app
Mini SEPress power button on drone 3 secs OR remote power button > Confirm on app
Mini 3 ProPress power button on drone 3 secs OR remote power button > Confirm on app
Phantom 4Press power button on drone 5 secs OR remote power button > Confirm on app

Final words about Turn DJI Drone Off

Properly powering down your DJI drone after each flying session is important to safely shut systems off, save battery, and prevent overheating or damage. Avoid simply unplugging the battery to turn off.

Use the remote or manual button procedures to initiate the automated off sequence. Power down accessories in the proper order, remove batteries for storage, and pack the drone away fully deactivated.

Following good shutdown habits maximizes the lifespan of your expensive drone!

If you want to learn more about  how to turn DJI Drone off, check the following video out:

How to turn off your dji mini 2 drone and controller

FAQs about Turn DJI Drone Off

How to turn off DJI Mini 2 controller?

You can hold down the power button on the Mini 2 controller for 4 seconds until it automatically turns off. You can also confirm shutdown in the DJI Fly app.

How to turn off DJI Mini 3?

Press and hold the power button on the Mini 3 aircraft for 3-5 seconds until the status LEDs start blinking. Wait for the automated shutdown sequence to complete before removing the battery.

How to turn on DJI drone?

First insert the battery and power up, then press and hold the remote controller power button for 1-2 seconds to initiate linking. Open the DJI Fly app on your mobile device to connect to the drone.

How to turn on DJI Mini 2 drone?

Insert the battery, long press the remote controller power key for 1-2 seconds to begin linking, short press the power key on the aircraft to turn on the Mini 2. Connect in the DJI Fly app.

How to turn off DJI Mini SE controller?

Press and hold the Mini SE controller power button for 4 seconds until you hear two beeps and it turns off. You can also manually confirm shutdown in the mobile app.

How to turn off DJI Air 2S controller?

Press and hold the Air 2S controller power button for over 4 seconds until the controller automatically turns off.

How to turn off DJI Mavic Pro controller?

Press and hold the Mavic Pro controller power button for 1 second to power off the controller. You can turn off the controller after the drone is already powered down.

How to turn off DJI Mavic Air 2?

The Mavic Air 2 has auto shutdown feature. After flight, press and hold the remote power button for 3 seconds, then confirm shutdown in the app.

How do I turn off my DJI 3 drone?

After landing the Mini 3, press and hold the power button for 3-5 seconds. The drone’s LEDs will blink to show it’s turning off. Keep holding until the blinking stops to fully power down the drone. Then, remove the battery by pressing and holding its small button until the LEDs go off. If you want to transfer media, take out the memory card. Lastly, turn off the remote controller by holding its power button for 3 seconds.

Eliza

Hello, I'm Eliza. an expert in drone technology, I provide in-depth analysis on the evolution and impact of drones from various perspectives - technical capabilities, policy considerations, societal implications. Through balanced and nuanced reporting, I aim to advance thoughtful discussions on this rapidly changing field. I look forward to exchanging ideas on the promise and perils of drones.