2024 Performance Unleashed: Holybro Pixhawk 6C + GPS


    The Pixhawk 6C FC combined with the PM07 12S Power Module + M8N GPS brings tons of power to the autopilot and makes it super easy to power and locate the multirotor.
    Add to Wishlist
    Add to Wishlist


    About this product

    The Pixhawk 6C FC combined with the PM07 12S Power Module + M8N GPS brings tons of power to the autopilot and makes it super easy to power and locate the multirotor.

    Pixhawk 6C Flight Controller Module

    The Pixhawk® 6C is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and Connector Standard. It comes with PX4 Autopilot® pre-installed. Inside the Pixhawk® 6C, you can find a STMicroelectronics® based STM32H743, paired with sensor technology from Bosch® & InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.

    The Pixhawk® 6C’s H7 microcontroller contains the Arm® Cortex®-M7 core running up to 480 MHz and has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models. The FMUv6C open standard includes high-performance, low-noise IMUs on board, designed to be cost-effective while having IMU redundancy. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances.

    The Pixhawk® 6C is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial applications.

    PM07 12S Power Module 

    The Power Management Board (PM Board) serves the purpose of a Power Module as well as a Power Distribution Board. In addition to providing regulated power to Pixhawk 4 and the ESCs, it sends information to the autopilot about the battery’s voltage and current supplied to the flight controller and the motors.

    M8N GPS

    The M8N GPS has a UBLOX M8N module, IST8310 compass, tri-colored LED indicator, and a safety switch. There are 3 different connector options for different purposes.
    This module ships with a baud rate of 38400 5H.


    Pixhawk 6C Flight Controller Module

    • High-performance H7 Processor with clock speed up to 480 MHz
    • New cost-effective design with the low-profile form factor
    • Redundant inertial measurement unit (IMU) from Bosch® & InvenSense®
    • Newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
    • IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs


    PM07-12S Power Module

    • PCB Current: total 120A outputs (MAX)
    • UBEC 5v output current :3A
    • UBEC input voltage : 7~51v (2~12s LiPo)
    • Dimensions:68*50*10 mm
    • Mounting Holes:45*45mm
    • Weight: 47.5g

    M8N GPS

    • Ublox Neo-M8N module
    • Industry-leading –167 dBm navigation sensitivity
    • Cold starts: 26s
    • LNA MAX2659ELT+
    • 25 x 25 x 4 mm ceramic patch antenna
    • Rechargeable Farah capacitance
    • Low noise 3.3V regulator
    • Current consumption: less than 150mA @ 5V
    • Fix indicator LEDs
    • Protective case
    • Cable Length: 26cm
    • Diameter 50mm total size, 32 grams with the case.


    • 1 x Pixhawk 6C Flight Controller Module
    • 1 x PM07 12S Power Module
    • 1 x Cable Set
    • 1 x M8N GPS