Sale!

    Chimera7 Pro V2: HD RTF Drone for Ultimate Performance 2024

    $1,588.99

    Add to Wishlist
    Add to Wishlist
    Category:

    Description

    The KING of Long Range FPV! Another breakthrough in FPV visuals from DJI with our upgraded frame and electronics. A super-efficient iFlight 7.5inch Long-Range bird that can go where you couldn’t go before and can carry bigger batteries to get the flight time to surf the swiss alps if you want! A super stiff frame for minimum resonance and XING2 2809 motors for maximum 7.5inch prop control. Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or our new 6S 3300mAh battery.

    Highlights:

    Smooth and Powerful XING2 Motors

    The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection.

    Latest Chimera7 Pro Frame for Maximum Protection

    The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.

    DJI O3 HD Air Unit Low-Latency Digital Transmission 

    Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI)

    4K Stabilized Video with 155° Ultra-Wide Angle

    Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)

    Secured Battery Plug with Anti-Spark Filter

    Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.

    Specially Designed Heatsink for DJI O3 HD Air Unit

    Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.

    GPS Pre-Installed for More Safety at A Distance

    GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.

    Changelog:

    December 13, 2022: New silicone inserts have been designed to replace the TPU ones,which are holding the 03 cam in the side panels.

    June 27, 2023: The antenna installation method is changed from horizontal to vertical.

    Specifications:

    Product Name: Chimera7 Pro V2 6S HD

    FC: BLITZ F722 Flight Controller

    ESC: BLITZ E55 4-IN-1 2-6S 55A ESC

    Video Transmission: DJI O3 Air Unit

    Frame: 327mm wheelbase

    Motor: XING2 2809 motors

    Prop: 7.5X3.7X3 propellers

    Weight: 695±5g

    Model: Chimera7 Pro

    Takeoff Weight incl. 8000mAH: Approx. 1619±10g

    Takeoff Weight incl. 3300mAH: Approx. 1165±10g

    Dimensions (L×W×H):270x199x34mm

    Max Speed: 140km/h

    Maximum Takeoff Altitude: 7000 m

    Max Hover Time: Approx. 30 mins

    Max Flight Distance: 18 km

    Operating Temperature Range: -10° to 40° C (14° to 104° F)

    Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm

    Antennas: Dual Antennas

    GNSS: GPS+SBAS+Galileo+QZSS+Glonass

    Video Transmission:

    Product Name: DJI O3 Air Unit

    Weight: Approx. 36.4 grams(headband included)

    Dimensions (L×W×H): L32.5 * W30.5 * H 14.5mm

    Communication Bandwidth: Max 40 MHz

    FOV (single screen): 155°

    Communication Frequency: 2.400-2.4835 GHz;5.725-5.850 GHz

    End-to-End Latency

    With DJI FPV Goggles V2:

    810p/120fps Video Transmission Quality: The latency is lower than 28 ms.

    810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

    With DJI Goggles 2:

    1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.

    1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.

    Max Video Transmission Bitrate: 50 Mbps

    Max Video Transmission Range:10 km (FCC), 2 km (CE), 6 km (SRRC)

    Operating Temperature Range: -10º to 40º C (14° to 104° F)

    Power Input: 7.4-26.4 V

    Audio Transmission: N/A

    FPV Radio:

    Product Name: Commando 8 ELRS Radio

    Weight: 310g (±10g)

    Dimentions(LxWxH): L 190 x W 150 x H 51mm

    Communication Frequency: 5.725-5.850 GHz

    Transmission Power(EIRP):

    2.4GHz: FCC: 27 dBm; CE: <14 dBm; SRRC: <19 dBm

    915MHz:FCC: 30 dBm; CE: <14 dBm; SRRC: <19 dBm

    Operating Current/Volts: 0.6 A @ 7.6 V

    Charging Time: 1 hour and 30 mini

    Operating Time: Approx. 8 hours

    Operating Temperature Range : 0°C  to  40°C(32°F to 104°F)

    Charging Temperature Range: 5°C to  40°C(41°F to 104°F)

    FPV Goggles:

    Product Name: DJI Goggles 2

    Weight: Approx. 290 grams(headband included)

    Dimensions (L×W×H): L167 * W1039 * H 813mm

    Screen Size (single screen): 0.49-inch

    Resolution (single screen): 1920×1080

    Refresh Rate: Up to 100 Hz

    Interpupillary Distance Range: 56-72 mm

    Diopter Adjustment Range: -8.0 D to +2.0 D

    FOV (single screen): 51°

    Communication Frequency: 2.400-2.4835 GHz;5.725-5.850 GHz

    Transmission Power (EIRP):

    2.4 GHz: < 30 dBm (FCC), < 20 dBm (CE/SRRC/KC)

    5.8 GHz [4]: < 30 dBm (FCC), < 23 dBm (SRRC), < 14 dBm (CE/KC)

    Max Video Transmission Bitrate: 50 Mbps

    Operating Temperature Range: 0° to 40° C (32° to 104° F)

    Power Input: 7-9 V (1.5 A)

    Packing List:

    1 x Chimera7 Pro V2 HD BNF

    1 x Commando 8 ELRS Radio

    1 x DJI Goggles 2

    2 x Antenna

    2 x Battery strap

    Important:

    All iFlight BNFs are tested before shipment to guarantee highest quality.

    If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.

    Note:

    1. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:

    (1)Any military combat purpose or military combat related use;

    (2)Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.

    2. If party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.

    FAQ:

    The o3 air unit have only one antenna whereas in the pic there are two video antenna. Is the photo different or you have found a way and added two antenna and does it affect the performance

    Hello Sir, The DJI supports 2 antennas, but for the DJI side, it’s dual-band (5.8GHz and 2.4GHz, work in 5.8GHz in Tx and Rx, the 2.4GHz is only for Rx), but on the FPV side, there is no difference, we can only use 5.8GHzdual antennas as we did the same before. iFlight Support Team

    No luck my goggles got black spot on right screen,I dont know how to do?

    DJI Goggles 2 uses Micro-OLED screen technology, which has significantly improved in terms of display brightness, color saturation, PPI and other aspects compared to previous products.

    Therefore, the production process standards are more refined. At the same time, due to the use of Micro-OLED screen technology, there may be slight color dots in some specific images such as (black/white/green/blue and other pure color backgrounds), but it does not affect the viewing experience.

    The following is the DJI reference standard: a single (non-continuous) screen allows up to 50 points below 0.08mm.

    What is the default tune for this build? I erased everything and want to get the factory tuning in.

    Use the preset in betaflight to recover the default setup.

    What is the startup and shutdown process of GPS rescue mode?

    1. Turn on the GPS rescue mode through the remote control. After the drone flies back, flip the switch to turn off the mode.

    2. If the drone has automatically triggered the GPS rescue and you want to take over manually after flying back, you need to toggle any joystick on the left or right to take over, instead of flipping the GPS rescue switch.