2024 BLITZ E80 Pro 4-IN-1 ESC – Ultimate RC Innovation


    The MOSFET used by BLITZ E80 is PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with a maximum power dissipation of 198W. BEC power supply adopts TI automotive-grade dedicated synchronous rectifier

    Add to Wishlist
    Add to Wishlist


    The BLITZ E80 is equipped with PSMN1R0-40YLD MOSFETs capable of handling a continuous current of 80A at 25°C, and a maximum power dissipation of 198W. It utilizes a TI automotive-grade dedicated synchronous rectifier chip from the BEC power supply, capable of supporting voltages up to 100V.

    The PCB circuit’s 1-4 layer power board boasts an ultra-thick 4OZ copper, guaranteeing continuous output during high-powered operations. The system is powered by a STM32F051 main controller processor that operates at a speed up to 48MHz, working in harmony with a three-in-one driver IC, bridging the gap to faster operational speeds.


    Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection

    G071 MCU, 48mHz maximum clock speed;

    TDK MLCC Low ESR ceramic capacitors;

    Top grade PSMN1R0-40YLD MOSFET;

    8 layers double-sided PCB board


    Product Name: BLITZ E80 4-IN-1 ESC

    Input Voltage: 2-8S

    Max. Continuous Current: 80A

    Max. Burst Current: 100A

    MCU: G071

    BEC: No

    Firmware: BLHeli32

    Current Sensor: Yes

    Telemetry: Supported

    Target: IFLIGHT_BLITZ_G2

    Mounting Dimensions: 35x35mm/Φ3mm

    Dimensions: 35x42mm

    Weight: 65g(±10)

    Protocal:Supports DShot DShot150/300/600/MultiShot/ OneShot etc

    Packing List

    1 x BLITZ E80 4-IN-1 Pro ESC (G2)

    1 x Wiring set


    BLHeliSuite download (BL32): https://github.com/blheli-configurator/blheli-configurator/releases


    If you want to use it for Taurus X8 V3, please select “Without CNC”.